Factory Outlets Air hockey table SZX-AH03 Wholesale to Estonia

Short Description:

Size 72″ x 36″ x 32″ 84″ x 48″ x 32″ 183 x 91 x 81cm  213 x 122 x 81cm Material  MDF MDF Playboard  15mm 15mm Scorer Electronic Electronic Multi Function Surface PVC Laminated PVC Laminated Leg Leveler dia. 90mm dia. 90mm Packing 118 x 96 x 18cm 218 x 127 x 23cm


Product Detail

Specifications

Product Tags

Related Video

Feedback (2)

, , ,
Factory Outlets Air hockey table SZX-AH03 Wholesale to Estonia Detail:

Size

72″ x 36″ x 32″

84″ x 48″ x 32″

183 x 91 x 81cm

 213 x 122 x 81cm

Material

 MDF

MDF

Playboard

 15mm

15mm

Scorer

Electronic

Electronic Multi Function

Surface

PVC Laminated

PVC Laminated

Leg Leveler

dia. 90mm

dia. 90mm

Packing

118 x 96 x 18cm

218 x 127 x 23cm


Product detail pictures:

Factory Outlets Air hockey table SZX-AH03 Wholesale to Estonia detail pictures


Factory Outlets Air hockey table SZX-AH03 Wholesale to Estonia, The product will supply to all over the world, such as: , , ,

  • Previous:
  • Next:


  • How to build a custom 10 player poker table. I would say I spent around $200.00 or less for this project. I have made this table using 1/2 inch MDF board from Home Depot. I used 1 – 4′ x 8′ sheet. This is my first time building anything like this. For a couple hundred bucks I think it came out good. I have plans to build a larger one piece deluxe poker table top. I will start on this starting in late Jan. 2013. I had a lot fun design and building this table. It was just something that I decided to do on the spur of the moment. I was going to re- build a green house for my wife, but she said she did not want one right now. The first thing that I did was drawn out plans for my table in my work note book. I made the drawing on one page. Then made a list on the next page of the items I would need. If you have some skills, this is not a very hard project to do on your – - – own & for me it was a lot of fun~!bIf you do not have a saw to cut this or do not want to bother with the cutting, Home Depot will do the cutting for you.

    The dimensions of the table: 85″ x 40″. I made this as a 3 piece folding table so that I could take it to other locations for games. There are 2 pieces that are 25″ x 40″ & 1 piece that is 35″ x 40″. This piece is the center piece. I used 3″ hinges from home depot (6) total. They were $2.97 (2) to a package. I made 10 slots for the poker chips. I cut the slots 11 1/2″ long x 4″ wide.
    As you see I have 8 trays that are straight & 2 that are curved. It is up to you if you want to use all straight or add the curved. To cut the slots for the poker trays I used a (Jig Saw). If you have a Router you can use it. Make sure that your slots are right for your trays before you cut~! Measure twice & cut only once. I used a pencil to trace out the 11 1/2″ x 4″ trays. I then used a drill to make holes in the corners of the tracings. This way I was able to use my Jig Saw to cut neatly the tray slots. Then I sanded each slot down. To round off the 4 corners I just used a 8″ plastic bowl. Place the bowl flush to each edge at each corner. Use a pencil to drawn the (half moon). Then cut & smooth with sand paper or your sander.
    You can purchase the poker trays on Ebay. The ones that I purchased were under $3.00 each. They have 4 slots for chips & 1 slot for a drink. They hold 100 poker chips.

    For the cover I went to Jo Ann Fabroc amd Craft Store. For the felt I choose their top quality red heavy duty. With a coupon the cost for a 95″ long & 60″ wide was only $13.00. For the padding under the felt I purchased from Jo Ann a package of Quilter’s 80/20. It is 80% Cotton, 20% Polyester. It measured 90″ x 108″ Queen Size. I folded this in two & then cut it long ways. Giving me 2 pieces 108′ long & 45″ wide. I put this on after I had used the hinges to put the 3 pieces of mdf together. Be really careful when you stretch this over your table. It can tear. I had no trouble, even with 2 of my dogs under my feet most of the time. Put the first sheet down. The fold back one panel of your table. Pull gently to smooth out. I used a high quality staple gun. One with 9/16 staples is best. If you uses a smaller staple gun, you will need to hammer the staples down. I spaced the staples about 8-9 inches apart. Repeat with the 2nd sheet of cotton padding. Cut away excess as you go along. Then place your felt cover over the padding. I used my medal clamps to hold down one end of the table. Fold back the other end of the panel of the table, stretch & Staple in place. I placed the staples about 2 inches apart all the way around. Cut away excess fabric as you go along. In between the trays their we sections of felt & padding. I cut back the padding. I then used a can of spray glue to seal down the Red felt on the under side. This made a tight surface with a excellent bounce with the 2 layers of padding under the felt. I used “old news paper” to protect the areas around where I was using the spray glue. I gave good coat of glue & I barely made a dent in the can that I purchased. So I can’t wait until next year to begin work on a bigger more deluxe table!

    Materials used: From Home Depot: 1 sheet of 12 MDF board from, 9/16 Arrow Staples (About 300), 1 can of spray glue, 6 – 3″ hinges & sand paper for my sander. From Jo-Ann store: 1 – 95″ x 60 heavy duty red felt. Their are many colors to choose from & designs. 1 package of padding that made 2 layers. From Ebay: 10 poker chip trays.
    Items recommend you have: Jig Saw, Electric Drill with large & small bits. Sander & sand paper. Screw drivers, hammer, a couple razor cutters with extra blades, staple gun (commercial kind 9/16 staples), 36″ ruler or longer. A couple pencils. 1 pair good sharp cloth cutting scissors. Old news paper for when you are using the spray glue.



    We also offer Moonbounce, slides, rockwalls, carnival games, food concessions, slides, mechanical bulls. We service any type of event large or small.
    We have over 1,000 items for rent.
    Call us 610-522-6204

    The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.

    5 Stars By Zoe 2016-9-27 16:17
    Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces,a nice business partner.


    5 Stars By Lulu 2015-10-18 15:17

    Send your message to us:

    • * CAPTCHA: Please select the Car

    Related Products

    • * CAPTCHA: Please select the Car

    WhatsApp Online Chat !